Morse code is Tapplock's 3rd backup access mode. It allows you to unlock your device using long (2 second hold) or short (1 second hold) combinations. Morse code gives access to your lock without your fingerprint or your phone.
You can set up your Morse Code in the "Lock Setting" section within the Tapplock App. Please see below for instructions on your specific model (Tapplock one+, Tapplock one, and Tapplock lite)
Please note:
- You will need to connect your Tapplock to the Tapplock App to set-up your customized Morse code.
- Short combination - Indicated by a blue LED on your Tapplock
- Long combination - Indicated by a white LED on your Tapplock
For Tapplock one+:
Once Morse code has been set up, disconnect the lock, by closing the Tapplock App and press the Power Button on the lock three times to enter Morse code mode. The status indicator light should be purple. Under Morse code mode, you can enter your combination by pressing the power button.
For Tapplock one:
Once Morse Code has been set up, disconnect the lock, by closing the Tapplock App and press the Power Button on the lock three times to enter Morse Code mode. The status indicator light should be blinking green. Under Morse code mode, you can enter your combination by pressing the power button.
For Tapplock lite:
Once Morse code has been set up, disconnect the lock, by closing the Tapplock App and press down on the lock's shackle three times to enter Morse code mode. The status indicator light should be purple. Under Morse code mode, you can enter your combination by pressing down on the shackle.
Check out our tutorial in the Tapplock App!