Morse code is Tapplock's 3rd backup access mode. It allows you to unlock your device using long (2 second hold) or short (1 second hold) combinations by pressing down on the shackle. Morse code gives access to your lock without your fingerprint or your phone.
You can set up your Morse code in the "Lock Setting" section within the Tapplock App . Once Morse code has been set up, press down on the lock's shackle three times to enter Morse code mode. The status indicator light should be purple. Under Morse code mode, you can enter your combination by pressing down on the shackle.
- You will need to connect your Tapplock to the Tapplock App to set-up your customized Morse code.
- Short combination - Indicated by a blue LED on your Tapplock lite
- Long combination - Indicated by a white LED on your Tapplock lite