Morse code is Tapplock's third backup access mode. It allows you to unlock your device using long (2 second hold) or short (1 second hold) combinations by pressing the power button. Morse code gives access to your lock without your fingerprint or your phone.
You can set up your Morse code in the "Lock Setting" section within the Tapplock App. Once Morse code has been set up, disconnect the lock, by closing the Tapplock App and press the Power Button on the lock three times to enter Morse code mode. The status indicator light should be purple. Under Morse code mode, you can enter your combination by pressing the power button.
Please note:
- You will need to connect your Tapplock to the Tapplock App to set-up your customized Morse code.
- Short combination - Indicated by a blue LED on your Tapplock one+
- Long combination - Indicated by a white LED on your Tapplock one+